ADT® Authorized Dealer Serving Little Rock, Jacksonville & The Surrounding Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Little Rock House

Property owners must protect against numerous risks like burglary, fire, and flooding. But what about a danger that can’t be perceived by human senses? Carbon monoxide creates a unique challenge because you might never be aware that it’s there. Even so, installing CO detectors can effectively shield you and your household. Find out more about this potentially lethal gas and where to place carbon monoxide detectors in your Little Rock property.

What Is Carbon Monoxide?

Known as the silent killer because of its absence of color, taste, or odor, carbon monoxide is a readily found gas caused by an incomplete combustion of fuels. Any appliance that utilizes fuels like an oven or fireplace can produce carbon monoxide. Even though you usually won’t have problems, difficulties can arise when equipment is not regularly inspected or appropriately vented. These oversights can lead to a proliferation of this dangerous gas in your residence. Generators and heaters of various types are commonly responsible for CO poisoning.

When subjected to minute amounts of CO, you might experience headaches, dizziness, fatigue nausea, or vomiting. Extended exposure to higher concentrations can lead to cardiopulmonary arrest, coma, and death.

Tips On Where To Place Little Rock Carbon Monoxide Detectors

If you don’t use at least one carbon monoxide detector in your home, purchase one today. If possible, you should install one on each level of your home, including basements. Explore these recommendations on where to place carbon monoxide detectors in Little Rock:

  • Put them on every floor, especially in areas where you utilize fuel-burning appliances, such as furnaces, water heaters, fireplaces, and gas dryers.
  • Always use one within 10 feet of sleeping areas. If you only get one CO detector, this is the place for it.
  • install them about 10 to 20 feet away from potential CO producing appliances.
  • Do not install them directly beside or above fuel-consuming appliances, as a small degree of carbon monoxide could be released when they start and prompt a false alarm.
  • Attach them to walls about five feet off the ground so they will test air where inhabitants are breathing it.
  • Avoid installing them near doors or windows and in dead-air zones.
  • Place one in spaces above attached garages.

Check your CO detectors routinely and maintain them per manufacturer recommendations. You will usually have to replace units in six years or less. You should also make sure any fuel-utilizing appliances are in in good working order and have adequate ventilation.