Categories

False alarms and system hiccups can be frustrating, and even more concerning, may prevent your home security system from working how it should. Fortunately, most troubles, from dead batteries to false alarms, are straightforward to correct. Explore our tips for troubleshooting your home alarm system in Little Rock. We’ll help keep your household shielded and your system operating properly.

Test Your Home Security System In Little Rock

One of the most sensible ways to troubleshoot your property’s defense is to test it! Newer systems permit you to put them in test mode to keep you from prompting an emergency call. Once in test mode, take these steps:

• Arm your system as you typically would when leaving.
• Open a window or door protected by a contact sensor, or test other equipment. Shut the door or window so it doesn’t trigger the alarm as you switch out of test mode.
• Permit the alarm to resonate for 60 seconds to make sure a transmission is delivered to the security provider and an entry is created in the alarm system log.
• Continue testing equipment as you wish
• Inspect the alarm’s activity log to verify functionality.

No need to worry, monitoring professionals will be aware that your alarm system is undergoing a test. Just be sure to switch out of test mode when you’re done. It’s a good idea to test every other month or whenever you adjust your home’s phone or internet connectivity.

Inspect The Placement And Condition Of Motion Sensors

Although an integral aspect of your alarm system, motion sensors are notorious for false alarms. Prevent them with a few simple troubleshooting steps.

• Do a visual check. Are there objects that could shift within the sensor’s detection area, like drapery blown in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can cause poor performance. Ensure the face is clean.
• Does the motion detector come with pet immunity you can turn on? Some sensors can be set to ignore pets weighing as much as 100 pounds.
• When was the battery changed? A nearly depleted battery can impact performance or cause false alarms.
• Is the sensor facing a heat source? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Look Out For Low Battery Notifications

One helpful aspect of modern home security systems is that they’ll notify you when batteries are running low. If your system uses a control panel or app, you’ll usually discover messages there. Depending on your system, you may detect an occasional beep when batteries are getting low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that should be replaced every 1 to 2 years. It’s a good idea to keep batteries ready and establish a replacement schedule. Many systems also have a backup battery for the central control panel. This battery helps keep your system operating if you lose power and should recharge once power is restored. If it doesn’t, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Little Rock 

As the leading name in home security, ADT builds systems that offer superior protection and functionality. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always be sent updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Little Rock home and family. Call (501) 226-1522 or submit our form today!